DIY Solar Panel Kit Prices
One to two person system
£1650 (inc VAT & delivery*)
The single solar panel water heating system kit containing 20 evacuated tubes
should be sufficient for a one to two person home
with a southeast to southwest facing roof and average hot water requirements.
- A single solar water panel containing 20 high efficiency solar evacuated tubes.
- The panel covers around 2.25 square metres
- Panel dimensions : 1.76 metres (height) * 1.5 metres (width) * 13 cm
- Each double walled evacuated tube is 47mm * 1.5 metres - High efficiency, double insulated, vented solar hot water cylinder (e.g. 117 litres to 162 litres) which will replace your existing hot water cylinder (if you require a less common unvented/mains pressure hot water cylinder, please be aware that these cost around £450 more)
- Copper tubing (with high temperature insulation) required to connect the solar water panel to the cylinder.
- A controller that monitors the temperature at three points: the solar water panel on the roof, the bottom of your cylinder and the top of your cylinder. The controller automatically switches on the water pump when the water in the panel is about 6 degrees warmer than the bottom of the hot water cylinder.
- Other components required to complete the system, including: an expansion vessel, pressure relief valve, pressure gauge, water pump, non-return valves, stop valves and drain valves.
- Solar antifreeze to ensure the water in the Solar Panel Water Heating system never freezes.
A full itemised list of all the components in the kit can be provided upon request
*Some parts of Scotland, Wales and parts of England will incur an additional delivery charge
solar panel water heating system - schematic diagram
